Stripping Barrier Coat Using Circa 1850 Stripper
Circa 1850 Heavy Body Paint & Varnish Remover quickly and easily strips off multiple layers of oil, latex and epoxy paint; oil and latex varnish; polyurethane; moisture cure; lacquer and shellac. Its gel formula is ideal for exterior use and vertical surfaces. Safe to use on fine furniture – will not raise wood grain, harm most glue joints or veneers, or damage patina. May soften plastic and fiberglass. Circa 1850 Heavy Body Paint & Varnish Remover is non-flammable and almost odourless. Avoid working in direct sunlight or wind. Wear gloves and protective eyewear. Protect work area with polyethylene or foil sheet. Pour some remover into a foil or metal container. Brush a generous coat onto .1-.4m² (1-4ft²) of surface and let stand for 15 minutes or until paint blisters. Keep area being stripped completely saturated with the stripper. If stripper dries out, reapply to reactivate. Remove softened finish using a scraper. If the finish is exceptionally thick and some residue remains, repeat the procedure. Remove finish residue with steel wool dipped in remover. Allow the surface to dry. Sand wood surfaces lightly prior to staining or refinishing.
For interior use or intricate surfaces use Circa 1850 Furniture Stripper.
Contents may be under pressure. Place a rag over the cover and open slowly. If the container is warm, cool prior to opening. Do not use near an open flame.