Ligna Pronto Natural Oil 3.78L

ligna-pronto

Ligna Pronto Natural Oil 3.78L

$189.95$203.95

Compare
SKU: N/A Category:

Share this product

Description

Ligna Pronto Natural Oil 3.78L for wooden furniture, walls and woodwork protects, colours and seals in only one application. Composed of natural oil and natural resin PRONTO enhances wood grain, protects it from premature wear, water, stains and makes the surface easy to maintain. With its high-covering power and monocoat application, LIGNA PRONTO oil is currently the most economical product for finishing your wooden projects. It is easy to apply and take 6 to 9 hours to dry depending on the colour you’ve chosen.

  • MONOCOAT OIL FOR LOW DEMAND INTERIOR WOOD SURFACES SUCH AS RAW, STRIPPED OR HARDWOOD; FURNITURE, WALLS, CEILINGS AND WOODWORK.

    Oil for walls, ceilings, kitchen cabinets, furniture, doors, windows and woodwork.

*** Professional Tip ***Ligna Pronto Natural Oil 3.78L oil can be easily applied to all types of hardwood, domestic and exotic. You can add a second coat on surfaces used more intensively such as floors. The durability will be increased and the surface will be shinier. All interior wood surfaces can be finished with LIGNA PRONTO monocoat oil.

PREPARATION:

The surface must be clean and free of wax and varnish residue. Make sure the product is at room temperature before application.

Mix before applyingSand wood with 100-120 grit sandpaper. Remove dust with a clean, dry, WHITE COTTON RAG. Keep PRONTO at a temperature above 15 °C.

For high-density wood, such as maple or exotic wood, moisten with a clean mop or damp WHITE COTTON RAG. When surface is completely dry (about 2 hours), sand gently with 220 grit sandpaper to break down the wood’s fibre. Remove dust.

APPLICATION:

Apply a thin coat  of Ligna Pronto Natural Oil 3.78L with a clean and dry WHITE COTTON RAG, a PAD PAINTER, or an APPLICATOR PAD. After 15 to 20 minutes maximum, wipe along the wood grain to help penetration and remove excess oil.

Optional – To soften the surface and increase lustre by 20%, polish with a white nylon pad between 2 and 36 hours after application.

  • After 6-9 hours: moderate and careful use;
  • After 2-3 days: regular use;
  • After 10 days: maintenance with LIGNA products.

TOOL CLEANING:

Use mineral spirits

NUMBER OF COATS:

Only one coat is required. However, two coats will increase lustre and the colour by 20%.

Wait 24h for a second coat.

WARNING: On low density woods such as pine, we recommend two coats to seal the wood correctly.

Optional – To soften the surface and increase the 20% of the lustre, polish with a white nylon pad between 2 and 36 hours after application.

COVERAGE:

150-300 sq. ft./litre according to the wood type.

⇒LIST OF COVERAGE⇐

MAINTENANCE:

Use LIGNA SOLIA and soap for oiled surfaces.

Wait 10 to 15 days for the surface to be well sealed before it comes into contact with water.

REFRESHMENT COAT:

Apply another coat after 8 to 15 years depending on the use of your surface.

COMPOSITION:

Blend of vegetable oils, resins and waxes.

VOCs:

Since Ligna Pronto Natural Oil 3.78L a monocoat product, you use 4 to 5 times less product than most water-based products. If you do the calculation, the VOCs in your environment will be much lower.
432 g/L.

FINISH:

Matte satin.

CONSERVATION:

From 2 to 3 years in an airtight container stored in a dry and cool place.

Additional information

Weight 6 kg
Dimensions 20 × 20 × 20 cm
Finishes

Anthracite, Brandy, Camel, Cappuccino, Driftwood, Eboney, Golden Pine, Grenoble, Honey, Mahogany, Natural, Paprika, Rosewood, Shrew, Sienna, Umber Brown, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.