Mon – Fri: 9:30AM – 5PM
Sat – Sun: Closed
Pronto Monocoat oil for wooden furniture, walls, and woodworks protects, colours and seals in only one application. Composed of natural oil and natural resin Pronto enhances the wood grain, protects it from premature wear, water, stains and makes the surface easy to maintain. With its high-covering power and single coat application, Ligna Pronto oil is currently the most economical product for finishing your wooden projects. It is easy to apply and take 6 to 9 hours to dry depending on the colour you’ve chosen.
Formulated in Italy Ligna products offer an “avant-gardiste” technology that is assembled in Quebec.
*** Professional Tip *** Pronto oil can be easily applied to all types of hardwood, domestic and exotic. You can add a second coat on surfaces used more intensively such as floors. The durability will be increased and the surface will be shinier. All interior wood surfaces can be finished with Ligna Pronto mono coat oil.
946 ml, 3.78 L
Anthracite, Brandy, Camel, Cappuccino, Driftwood, Eboney, Golden Pine, Grenoble, Honey, Mahogany, Natural, Paprika, Rosewood, Shrew, Sienna, Umber Brown, White
Mix before applying. Sand wood with 100-120 grit sandpaper. Remove dust with a clean, dry, cotton clot Keep Pronto at a temperature above 15 °C.
For high-density wood, such as maple or exotic wood, moisten with a floor mop or clean, wet rag. When the surface is completely dry (about 2 hours), sand gently with 220 grit sandpaper to break down the wood’s fiber. Remove dust.
Apply a thin coat with a clean, dry, cotton cloth and an applicator pad. After 15 to 20 minutes maximum, wipe along the wood grain to remove excess oil.
After 6-9 hours: moderate and careful use
|Number of Coats|
Only one coat is required. Two coats will increase the sheen of the wood. Wait for 9h to apply a second coat.
150-300 sq. ft./litre according to wood type.
Only logged in customers who have purchased this product may leave a review.