Zinsser Seal Coat 3.78L

Description

Zinsser Seal Coat 3.78L UNIVERSAL SANDING SEALER

 

Zinsser Seal Coat 3.78L Save time when finishing porous woods by starting with Rust-Oleum® Zinsser® Bulls Eye® Sealcoat Universal Sanding Sealer. This high-building solution seals the wood to create a surface that can be easily sanded. Contributes to an ultra-smooth final finish.

 

  • Compatible with ALL clear wood finishes
  • Great for sealing ALL interior wood, including floors
  • Dries lightning fast – can be sanded & recoated in minutes
  • Does not darken or yellow with age
  • Easy clean up with alcohol or ammonia and water
  • Gives extra beauty & warmth to water-base polyurethanes
  • Can be used as a pre-stain conditioner for pine and softwoods
  • Can be used as a bond coat under new finishes – adheres to any existing finish

FOR BEST RESULTS

Apply two coats  of Zinsser Seal Coat 3.78L to improve film build and give added depth to the final finish.

7. Handling and Storage
HANDLING: Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.
Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain
product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
STORAGE: Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep containers tightly closed.
Isolate from heat, electrical equipment, sparks and open flame. Do not store above 120 ° F. Store large quantities in buildings
designed and protected for storage of NFPA Class II combustible liquids. Keep away from heat, sparks, flame and sources of
ignition. Avoid excess heat. Product should be stored in tightly sealed containers and protected from heat, moisture, and foreign
materials.
Advice on Safe Handling of Combustible Dust: Minimize dust generation and accumulation. Routine housekeeping should be
instituted to ensure that dusts do not accumulate on surfaces. Dry powders can build static electricity charges when subjected to the
friction of transfer and mixing operations. Provide adequate precautions such as grounding and bonding or inert atmospheres. For
safe handling, refer to NFPA 654, Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and
Handling of Combustible Particulate Solids.visit our sister sitehttps://www.antiquerssupply.com/Circa1850/shellac.html

Additional information

Weight 6 kg
Dimensions 17.1 × 19 × 19 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.